Table of Contents  
Year : 2011  |  Volume : 2  |  Issue : 2  |  Page : 140-142  

Measures of central tendency: The mean

Assistant Editor, Journal of Pharmacology and Pharmacotherapeutics, India

Date of Web Publication6-Jun-2011

Correspondence Address:
S Manikandan
Department of Pharmacology, Indira Gandhi Medical College and Research Institute, Kadirkamam, Puducherry
Login to access the Email id

Source of Support: None, Conflict of Interest: None

DOI: 10.4103/0976-500X.81920

Rights and Permissions

How to cite this article:
Manikandan S. Measures of central tendency: The mean. J Pharmacol Pharmacother 2011;2:140-2

How to cite this URL:
Manikandan S. Measures of central tendency: The mean. J Pharmacol Pharmacother [serial online] 2011 [cited 2021 Dec 7];2:140-2. Available from:

In any research, enormous data is collected and, to describe it meaningfully, one needs to summarise the same. The bulkiness of the data can be reduced by organising it into a frequency table or histogram. [1] Frequency distribution organises the heap of data into a few meaningful categories. Collected data can also be summarised as a single index/value, which represents the entire data. These measures may also help in the comparison of data.

   Central Tendency Top

Central tendency is defined as "the statistical measure that identifies a single value as representative of an entire distribution." [2] It aims to provide an accurate description of the entire data. It is the single value that is most typical/representative of the collected data. The term "number crunching" is used to illustrate this aspect of data description. The mean, median and mode are the three commonly used measures of central tendency.

   Mean Top

Mean is the most commonly used measure of central tendency. There are different types of mean, viz. arithmetic mean, weighted mean, geometric mean (GM) and harmonic mean (HM). If mentioned without an adjective (as mean), it generally refers to the arithmetic mean.

Arithmetic mean

Arithmetic mean (or, simply, "mean") is nothing but the average. It is computed by adding all the values in the data set divided by the number of observations in it. If we have the raw data, mean is given by the formula

Where, Σ (the uppercase Greek letter sigma), X refers to summation, refers to the individual value and n is the number of observations in the sample (sample size). The research articles published in journals do not provide raw data and, in such a situation, the readers can compute the mean by calculating it from the frequency distribution (if provided).

Where, ƒ is the frequency and X is the midpoint of the class interval and n is the number of observations. [3] The standard statistical notations (in relation to measures of central tendency) are mentioned in [Table 1]. Readers are cautioned that the mean calculated from the frequency distribution is not exactly the same as that calculated from the raw data. It approaches the mean calculated from the raw data as the number of intervals increase. [4]
Table 1: Standard statistical notations

Click here to view

   Advantages Top

The mean uses every value in the data and hence is a good representative of the data. The irony in this is that most of the times this value never appears in the raw data.

Repeated samples drawn from the same population tend to have similar means. The mean is therefore the measure of central tendency that best resists the fluctuation between different samples. [6]

It is closely related to standard deviation, the most common measure of dispersion.

   Disadvantages Top

The important disadvantage of mean is that it is sensitive to extreme values/outliers, especially when the sample size is small. [7] Therefore, it is not an appropriate measure of central tendency for skewed distribution. [8]

Mean cannot be calculated for nominal or nonnominal ordinal data. Even though mean can be calculated for numerical ordinal data, many times it does not give a meaningful value, e.g. stage of cancer.

Weighted mean

Weighted mean is calculated when certain values in a data set are more important than the others. [9] A weight w i is attached to each of the values x i to reflect this importance.

For example, When weighted mean is used to represent the average duration of stay by a patient in a hospital, the total number of cases presenting to each ward is taken as the weight.

Geometric Mean

It is defined as the arithmetic mean of the values taken on a log scale. It is also expressed as the n th root of the product of an observation.

GM is an appropriate measure when values change exponentially and in case of skewed distribution that can be made symmetrical by a log transformation. GM is more commonly used in microbiological and serological research. One important disadvantage of GM is that it cannot be used if any of the values are zero or negative.

Harmonic mean

It is the reciprocal of the arithmetic mean of the observations.

Alternatively, the reciprocal of HM is the mean of reciprocals of individual observations.

HM is appropriate in situations where the reciprocals of values are more useful. HM is used when we want to determine the average sample size of a number of groups, each of which has a different sample size.

   Degree of Variation between the Means Top

If all the values in a data set are the same, then all the three means (arithmetic mean, GM and HM) will be identical. As the variability in the data increases, the difference among these means also increases. Arithmetic mean is always greater than the GM, which in turn is always greater than the HM. [5]

The other measures of central tendency (median and mode) and the guidelines for selecting the appropriate measure of central tendency will be dealt with in the subsequent issue.

   References Top

1.Manikandan S. Frequency distribution. J Phamacol Pharmacother 2011;2:54-6.  Back to cited text no. 1
2.Gravetter FJ, Wallnau LB. Statistics for the behavioral sciences. 5 th ed. Belmont: Wadsworth - Thomson Learning; 2000.  Back to cited text no. 2
3.Sundar Rao PS, Richard J. Introduction to biostatistics and research methods. 4 th ed. New Delhi, India: Prentice Hall of India Pvt Ltd; 2006.   Back to cited text no. 3
4.Sundaram KR, Dwivedi SN, Sreenivas V. Medical statistics principles and methods. 1 st ed. New Delhi, India: B.I Publications Pvt Ltd; 2010.  Back to cited text no. 4
5.Norman GR, Streiner DL. Biostatistics the bare essentials. 2 nd ed. Hamilton: B.C. Decker Inc; 2000.  Back to cited text no. 5
6.Glaser AN. High Yield Biostatistics. 1 st Ed. New Delhi, India: Lippincott Williams and Wilkins; 2000.  Back to cited text no. 6
7.Dawson B, Trapp RG. Basic and Clinical Biostatistics. 4 th ed. New York: Mc-Graw Hill; 2004.  Back to cited text no. 7
8.Swinscow TD, Campbell MJ. Statistics at square one. 10 th ed. New Delhi, India: Viva Books Private Limited; 2003.  Back to cited text no. 8
9.Petrie A, Sabin C. Medical statistics at a glance. 3 rd ed. Oxford: Wiley-Blackwell; 2009.  Back to cited text no. 9


  [Table 1]

This article has been cited by
1 Potentially toxic elements and polycyclic aromatic hydrocarbons in street dust of Yazd, a central capital city in Iran: contamination level, source identification, and ecological–health risk assessment
Mohammad Javad Nematollahi, Sara Dehdaran, Farid Moore, Behnam Keshavarzi
Environmental Geochemistry and Health. 2021; 43(1): 485
[Pubmed] | [DOI]
2 Trace elements in the shoreline and seabed sediments of the southern Caspian Sea: investigation of contamination level, distribution, ecological and human health risks, and elemental partition coefficient
Mohammad Javad Nematollahi, Behnam Keshavarzi, Farid Moore, Rolf David Vogt, Hassan Nasrollahzadeh Saravi
Environmental Science and Pollution Research. 2021; 28(43): 60857
[Pubmed] | [DOI]
3 Development and characterization of nano-emulsions and nano-emulgels for transdermal delivery of statins
Mduduzi N. Sithole, Suzanne Marais, Sumari M. Maree, Lissinda H. Du Plessis, Jeanetta Du Plessis, Minja Gerber
Expert Opinion on Drug Delivery. 2021; 18(6): 789
[Pubmed] | [DOI]
4 Attributes and impact of advance payment system on cash flow, project and organisational performance
Emmanuel Dele Omopariola, Abimbola Olukemi Windapo, David J. Edwards, Nicholas Chileshe
Journal of Financial Management of Property and Construction . 2021; ahead-of-p(ahead-of-p)
[Pubmed] | [DOI]
5 Accurate Medication Adherence Measurement Using Administrative Data for Frequently Hospitalized Patients
Rafia S. Rasu, Suzanne L. Hunt, Junqiang Dai, Huizhong Cui, Milind A. Phadnis, Nishank Jain
Hospital Pharmacy. 2021; 56(5): 451
[Pubmed] | [DOI]
6 Model of Choice Photovoltaic Panels Considering Customers’ Expectations
Dominika Siwiec, Andrzej Pacana
Energies. 2021; 14(18): 5977
[Pubmed] | [DOI]
7 Discriminating Between Second-Order Model With/Without Interaction Base on Central Tendency Estimation
Owhondah P.S., Enegesele D., Biu O.E., Wokoma D.S.A.
African Journal of Mathematics and Statistics Studies. 2021; 4(3): 47
[Pubmed] | [DOI]
8 Evaluation the Performance of Several Gridded Precipitation Products over the Highland Region of Yemen for Water Resources Management
Ali Hamoud AL-Falahi, Naeem Saddique, Uwe Spank, Solomon H. Gebrechorkos, Christian Bernhofer
Remote Sensing. 2020; 12(18): 2984
[Pubmed] | [DOI]
9 Impact of health information technology optimization on clinical quality performance in health centers: A national cross-sectional study
Robert Baillieu, Hank Hoang, Alek Sripipatana, Suma Nair, Sue C. Lin, Mustafa Ozkaynak
PLOS ONE. 2020; 15(7): e0236019
[Pubmed] | [DOI]
10 Antimicrobial action of 1,10-phenanthroline-based compounds on carbapenemase-producing Acinetobacter baumannii clinical strains: efficacy against planktonic- and biofilm-growing cells
Roberta F. Ventura, Anna Clara M. Galdino, Livia Viganor, Ricardo P. Schuenck, Michael Devereux, Malachy McCann, André L.S. Santos, Ana Paula F. Nunes
Brazilian Journal of Microbiology. 2020; 51(4): 1703
[Pubmed] | [DOI]
11 Lower-limb motor-performance asymmetries in English community-level female field hockey players: Implications for knee and ankle injury prevention
Nicholas C. Clark, Lucy H. Clacher
Physical Therapy in Sport. 2020; 43: 43
[Pubmed] | [DOI]
12 Ecological-health risk assessment and bioavailability of potentially toxic elements (PTEs) in soil and plant around a copper smelter
Mohammad Javad Nematollahi, Behnam Keshavarzi, Fatemeh Zaremoaiedi, Mohammad Ali Rajabzadeh, Farid Moore
Environmental Monitoring and Assessment. 2020; 192(10)
[Pubmed] | [DOI]
13 Perceived and Reported Reliability of the Electricity Supply at Three Urban Locations in Indonesia
Kay A. Kunaifi,Ange`le Reinders
Energies. 2018; 11(1): 140
[Pubmed] | [DOI]
14 Quality dimensions in online communities influence purchase intentions
Chung-Yu Wang,Hsiao-Ching Lee,Li-Wei Wu,Chih-Chung Liu
Management Decision. 2017; 55(9): 1984
[Pubmed] | [DOI]
15 Population Size Estimation of Men Who Have Sex with Men in Tbilisi, Georgia; Multiple Methods and Triangulation of Findings
Lela Sulaberidze,Ali Mirzazadeh,Ivdity Chikovani,Natia Shengelia,Nino Tsereteli,George Gotsadze,Ruan Yuhua
PLOS ONE. 2016; 11(2): e0147413
[Pubmed] | [DOI]


    Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
    Access Statistics
    Email Alert *
    Add to My List *
* Registration required (free)  

  In this article
    Central Tendency
    Degree of Variat...
    Article Tables

 Article Access Statistics
    PDF Downloaded1893    
    Comments [Add]    
    Cited by others 15    

Recommend this journal